Shop Irrigation Parts-Fittings, Wastewater Supplies

Shop Irrigation Parts-Fittings, Wastewater Supplies

Irrigation Supplies Parts and Fittings
ORDERS BY 3PM EST- SHIP SAME DAY

Search

Search By Category

Irrigation Supplies and Fittings *Drip Irrigation Kits * Wastewater Systems*Hoses and Tubing*For Manure*Chemicals*Fertilizers

We Make Irrigation More Convenient

We offer fast shipping, personalized customer service, easy online ordering, simple online account management, freight shipping, quotes for large irrigation projects, drip irrigation or sprinkler systems, for greenhouses, agriculture, vineyards, breweries, wastewater, golf courses, and home landscape projects.

Contact us for a complete quote for large irrigation or wastewater projects. We want to be your irrigation/wastewater/fertilizer/manure parts and supplies experts.

info@irrigationsupplyparts.com

  • Poly Tubing for Drip Irrigation Systems

    Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.

  • 1/2" Inline Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits.  The Gator 100 is not large enough to enable the injector to work properly.  We recommend a minimum flow rate of 1.5 gallons per minute.
  • 4" Widecut Vine Curl for 0.830" O.D. Tubing.  Used to attach tubing to the wire.  Sold in packs of 50 each. Additional sizes available by special order.
  • 5/8" 8mil .25 GPH @ 12" W/ FLAP 1000' , OR .42 GPM PER 100' OF DRIP TAPE

  • AG FEEDER HOSE
    Durable: Nitrile rubber cover increases resistance to oil, fuel, most chemicals and petrochemicals; and stands up to ozone and oxidation. Rugged: 100% high tenacity yarn, extruded with thru-the-weave nitrile rubber construction for strength and greater flow. Service Worthy: Light weight allows for fast deployment and retrieval, saving time and money. High-Performance: Rubber construction delivers maximum durability, flexibility and service life.   Tested: Performance rated at -5°F to 200° F (-20°C to 93°C). Certified: Manufactured within the scope of our ISO-9001: 2015 certified quality assurance system. AG FEEDER HOSE LAY-FLAT NITRILE RUBBER HOSE

    CONSTRUCTION Extruded Nitrile Cover/Liner Polyester/Nylon Reinforcement

    TEMPERATURE RANGE -5° to 200°F (-20° to 93°C)

    STANDARD LENGTH 660' (200M) HOSE COLORS - Black

    AG Data Sheet Download
    For pricing and availability call in today and speak with one of our Sales Associates.
  • Dosatron D14MZ2 Fertilizer Injector Dosatron D14MZ2 Fertilizer Injector
    Dosatron fertilizer injectors can be used in a variety of installations and configurations. Mount them on booms or benches. Increase your flow with parallel installations, or inject multiple nutrients with series installations. It’s all up to you! Examples

     Aquaponics  Indoor Farming and Agriculture  Stacked Farming  Urban Gardening and Farming  Drain-to-Waste

    • Connection Size: 3/4" NPT
    • Percentage Range: 0.2 to 2%
    • Unit Weight: 6 lbs
    • Ounces Per Gallon Range: 0.256 to 2.560
    • Flow: 0.05 to 14 GPM (0.19 to 50 LPM)
    • Pressure: 4.3 to 85 PSI
    • Dimensions: 19 1/8" x 6 5/16"
    • Ratio Range: 1:500 to 1:50
    Included Accessories: Mounting bracket, suction hose, weighted strainer,  and the start up guide. Quick Start-Up Guide D14MZ2 Dosatron  Product Specifications Sheet D14MZ2 Dosatron *So easy to use and no electricity required, check out the simple instructions in the  Troubleshooting Guide D14MZ2 Dosatron Want more information? Check out the D14MZ2 Dosatron Owners Manual
  • D45RE15 Dosatron Irrigation Injector D45RE15 Dosatron Irrigation Injector
    Dilution Range: 1:500 to 1:66 (.2% to 1.5%) Water Flow Range: .4 to 20 GPM Operating Pressure Range: 7 to 70 PSI Available Housing Materials: Polyacetal (Standard Blue) Dimensions: 24” x 7 1/2” Weight: 8 lbs Connection Size: 1” NPT Maximum Temperature: 104o F Included Accessories: 6 ft clear suction tube, strainer, weight, mounting bracket and operating manual See the D45RE15 Dosatron Industrial Plumbing Assembly Instructions Check out the D45RE15 Dosatron Injector Owners Manual Simple maintenance - view the D45RE15 Dosatron Injector Schematics   Recommended Accessories: 200 mesh filter, check valve, pressure regulator, flow restrictor.
  • Dosatron Fertilizer Injector D25F1_Unit Dosatron Fertilizer Injector
  • 40GPM-units-in-parallel-Hort Dosatron Fertilizer Injector D8RE2
    Dilution Range: 1:500 to 1:50 (.2% to 2%) Water Flow Range: 2.2 to 40 GPM Operating Pressure Range: 2.2 to 116 PSI Available Housing Materials: Polypropylene (Standard Blue) Dimensions: 25 1/4” x 8 1/2” Weight: 12 lbs Connection Size: 1 1/2” NPT Maximum Temperature: 104o F D8RE2 Owner's Manual Dosatron D8RE2 Schematics Dosatron D8Re2 Specification Sheet Dosatron D8RE2 Quick-Start-Up-Guide Included Accessories: 6 ft clear suction tube, weighted strainer, mounting bracket and operating manual Recommended Accessories: 200 mesh filter, check valve. Optional Accessories: Bypass, part #: MPDI196
  • Pipe dimensions chart
    Durable T Pipe for underground irrigation systems. Simple and fast connections. Multiple sizes available.
  • Sale!

    Kneeling Mat

    $29.95 $24.95

    Kneeling Mat - Ideal For The Gardener

    Industrial Kneeling Mat with a unique handle location to provide a more useful kneeling area. It has excellent shock absorption and cushioning properties. Silicone free material. Measures 14" x 21".
  • 6" Electromagnetic Flow Converter by KROHNE

    The IFC 100 can be freely combined with KROHNE's entire standard series of electromagnetic flowmeters. The IFC 100 was designed for applications requiring an economical measuring solution with a high level of technology. KROHNE offers its customers a comprehensive application and process diagnostics package far beyond what device diagnostics normally offer. These devices continually measure all decisive parameters and convey information about the condition of the device, the quality of the measured value and potential application errors. The user has a precise overview of the process at any given time –thus fulfilling from A to Z the constantly increasing requirements of an optimal process. With its resistance measurement and noise measurement, the IFC 100 lays the foundation for even more process transparency and reliably reports about: • Gas bubbles and detection of solids • Changing or excessively low conductivity (e.g. during change of media or empty tube) • Deposits on electrodes • Electrode corrosion • Too high media or ambient temperature Interested in viewing a product selection list of all the KROHNE flow measurement lines?
  • Product highlights

    • Bi-directional flow measurement over a wide dynamic range (turndown ratio: 1000:1)
    • PTFE, PFA, ETFE, hard rubber, soft rubber or PU liner: excellent chemical and abrasion resistance
    • Wide range of electrode materials
    • Special designs, sizes, inner diameters and liner thicknesses on request
    • Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
    • Optional external coatings for offshore or subsoil installation (also acc. to ISO 12944)
    • Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
    • Full bore design: No moving parts, no wear, no pressure loss
    • On-site verification of flowmeter with OPTICHECK service tool

    Typical applications

    General
    • Standard applications with clean, aggressive or abrasive liquids
    Chemical and other process industries
    • Conductive fluid chemicals
    • Process water, cooling water
    Oil and gas industry
    • Water injection (high pressure)
    • Drilling mud
    • Produced water
    Minerals and mining industry
    • Hydrocyclone feed lines
    Pulp and paper industry
    • Chemicals (black liquor, bleach, etc.)
    Wastewater industry
    • Irrigation
    • Sludge and sewage treatment
    Interested in viewing a product selection list of all the KROHNE flow measurement lines?
  • Mazzei Fertilizer Injector Assembly for 2" Line.  Please call us for additional sizes and/or options.
  • Pipe dimensions chart
    Female or Male Top PVC underground riser with manufacturer warranty.
  • SLUDGE HOSE Snap-tite discharge hose
    Hose Construction – 100% high tenacity yarn, extruded with thru-the-weave polyurethane construction. Chemical Resistance –  capable of withstanding exposure to most hydro-carbons, gasoline, oils, alkalis and grease with no effect on the performance of the hose. Ozone Resistance –  shows no visible signs of cracking of the liner or cover when subjected to testing in accordance with ASTM D1149-64, 100 PPHM/122°F/70 hours Abrasion Resistance – Abrasion resistance 5X that of conventional rubber hose, 300,000 cycles on a Taber abrasion tester without exposure of the jacket. Designed for maximum service life and low operating cost. Fast deployment and retrieval – saving time and money Easy to store and transport Standard length – 660’ (200M), shorter lengths available Color – Brown, Blaze Orange Manufactured within ISO-9001: 2015 certified quality assurance system GROW YOUR OPERATIONS WITH ALL-AMERICAN QUALITY AGRICULTURAL HOSES Catering to generations of America’s growers, dealers and farmers, All-American Hose proudly offers a full line of hoses and couplings that are built to efficiently manage agri-business operations. Whether you need sludge injection hoses, feeder main lines or irrigation lines, they engineer and build premium quality hoses that are flexible, lightweight and ultra-durable to handle the job in any condition—from freeze/thaw cycles to extreme heat. To order please call in speak to one of our Sales Associates for pricing and availability.
  • CETA PC Emitter, Emitter 1/4" Punch Tool - 250 Series - 3.6mm
    1/4" Punch Tool - 250 Series - also known as 3.6 mm Hole Punch Ejector Style Hole Punch used for “punching” a hole in rigid poly tubing to insert 1/4″ barb fittings. This punch is constructed of heavy duty plastic. It creates clean, precise holes for 1/4″ barb fittings. Ejector pin quickly cleans the punch tool of debris. Brand Name: Jain  
  • Aqua Spray Stakes, Aqua Spray Sticks, Spray Sticks, Jain Irrigation Aqua Spray Stakes, Aqua Spray Sticks, Spray Sticks, Jain Irrigation
    Aqua Spray Sticks are engineered to provide an irrigation system that delivers both high performance and dependability. Ease-of-use, performance, and low-cost makes Aqua Spray Sticks an ideal product line for greenhouses, nurseries, and orchards. Simplicity in design and easy installation mean lower labor and material costs.  Sold in packs of 100 each. We only stock black and green spray sticks at this time.  Please call us for additional options / special orders at (517)458-9741.  
  • CETA PC Emitter, Emitter Emitter
    Color coded for easy flow identification, the Jain Ceta PC Emitter is a take-apart point source emitter with a separate barb for inlet and outlet installations. The Ceta PC Emitters self-flushing and insect baffle make it an ideal candidate for nursery and agricultural applications. PC stands for Pressure Compensating. Sold in packs of 100 each. Brand: Jain  
  • PC Emitter (CNL Feature) is an emitter with a separate barb for inlet and outlet installations. PC stands for Pressure Compensating while CNL stands for Closed No Leak.  These emitters open at 5.5 PSI and close at 4.3 PSI. Sold in packs of 100 each. Click here to view Irritec's product brochure. Brand: Irritec