Shop Irrigation Parts-Fittings, Wastewater Supplies

Shop Irrigation Parts-Fittings, Wastewater Supplies
  • 6" Doda Weld On Male Ball - 150mm 6" Doda Weld On Male Ball - 150mm
    6" Doda Weld On Male Ball - 150mm This Weld On Male Ball does not include the ring.  The 6" Locking Ring is sold separately. DodaLogoBrand Name: Doda
  • 6" Doda O-Ring - 150mm DodaLogoBrand Name: Doda
  • One of the key elements in a drip irrigation system is air relief. Clogged emitters can create substantial voids in coverage which can lead to dead plants and dry turf. Installing automatic air relief valves on the end of lateral lines and emitter line will prolong the efficiency of your system. Brand Name: JainJainLogo
  • Sale!
    1/2″ Rigid Supply Tubing (no orifices) Polyethylene Supply Tubing allows you to get water to the desired locations in a conservative manner. You may use fittings to extend the length of tubing, make a 90 degree angle or add a row to your system. A punch tool may be used to insert an emitter in the supply tubing at the exact location of a planting. The 1/4″ dripper line or 1/2″ dripper line with 12″ spacing may also be spurred from this supply tubing using 1/4″ barbed fittings or 1/2″ insert fittings, respectively. These products can be quite bulky and expensive to ship UPS Ground.  Please call for a freight quote.   Brand Name: JainJainLogo
  • Sale!
    50-11190600, 1/4" Distribution Tubing 50-11190600, 1/4" Distribution Tubing
    1/4″ Vinyl Distribution Tubing (no orifices) - .250" OD x .170" ID 1/4″ Vinyl Distribution Tubing allows you to get water to the desired locations in a conservative manner. You may use fittings to extend the length of tubing, make a 90 degree angle or add a row to your system. You can also insert an emitter at the end of the line to reach the exact location of a planting. A 250 barb goof plug may be used at the end of the line to close it off. Brand Name: JainJainLogo
  • One of the key elements in a drip irrigation system is air relief. Clogged emitters can create substantial voids in coverage which can lead to dead plants and dry turf. Installing automatic air relief valves on the end of lateral lines and emitter line will prolong the efficiency of your system. Brand Name: JainJainLogo
  • Sale!
    3/4" 90 Degree Street Elbow (MIPT x FIPT) - Schedule 40 PVC
  • Sale!
    3/4″ Rigid Supply Tubing (no orifices) - 1000' Roll - White Stripe - .927" OD x .817" ID Polyethylene Supply Tubing allows you to get water to the desired locations in a conservative manner. You may use fittings to extend the length of tubing, make a 90 degree angle or add a row to your system. A punch tool may be used to insert an emitter in the supply tubing at the exact location of a planting. Dripper line may also be spurred from this supply tubing.  Power Loc 80 Fittings work nicely with this tubing. This product can be quite bulky and expensive to ship UPS Ground. You must call for a freight quote Or your order maybe subject to refusal, thank you for understanding. Brand Name: JainJainLogo
  • Backflow Preventer (3/4" FHT x 3/4" MHT) A backflow preventer is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices.  It comes with a 3/4″ FHT inlet and a 3/4″ MHT outlet. No Teflon tape is required since both ends are hose thread. A standard hose washer is included to make a water tight seal.
  • Sale!
    Hose Swivel (3/4" FHT x 3/4" FPT) 3/4″ Hose Swivel attaches to a hose bib, faucet, spigot, hydrant, garden hose or hose threaded parts (like filters and pressure regulators) and accepts fittings with 3/4″ male hose threads (MHT).
  • Max-Flat Hose

    $68.68$91.98
    Larger diameter used as main & sub-main and smaller diameter as laterals in drip/micro irrigation system.
    • 1.5" Max-Flat Hose with 0.055" Wall/21 PSI.  300' rollWhile Supplies Last
    • 2" Max-Flat Hose with 0.055" Wall/21 PSI.  150' roll
    • 4" Max-Flat Hose with 0.106" Wall/21 PSI.  130' roll - Please call for a freight quote.  The roll is too heavy to ship via UPS Ground.
    Brand Name: Rivulis
  • Oval Hose, Flatube, Mainline Hose Oval Hose, Flatube, Mainline Hose

    Oval Hose

    $114.24$133.81
    Larger diameter used as main & sub-main and smaller diameter as laterals in drip/micro irrigation system.
    • 2" Oval Hose with 0.051" Wall/21 PSI.  450' roll
    • 3" Oval Hose with 0.076" Wall/21 PSI.  200' roll
    • 4" Oval Hose with 0.100" Wall/21 PSI.  130' roll
    Jain Oval Hose is manufactured from virgin LLDPE using advanced extrusion technology. The characteristics of LLDPE provide durable tubing with close dimensional tolerances. Once pressurized Jain Oval Hose becomes 98% round. Brand Name: Jain JainLogo