Drip irrigation air vents and pressure regulators: Pressure Regulators and Pressure Reducing Valves:
Pressure regulators reduce incoming water pressure to a set pressure usable by a drip system. A pressure regulator is used when the incoming pressure is too high for the emitters or fittings. The flow rate of the regulator should be matched with the system. Pressure regulation does not take effect until minimum specified flow passes through the regulator.
Controlling the air in irrigation systems is a means to control the water flow. The most efficient way to control air is by the proper use of air vents.
Both the presence of air, and absence of air, can cause problems or damage irrigation systems.
Trapped air in pipes impedes water flow and can lower watering uniformity. It can also cause water hammer and damage to pipes and fittings. Air in pipes also produces inaccurate readings for water and flow meters. For reliable and accurate water measurement, flow meters require pipes to be full of water.
The absence of air in pipes can trigger contaminates such as mud and dirt to be drawn into the piping system.
-
Please call 517-458-9741 for the very best shipping rates on this product!
-
Please call 517-458-9741 for the very best shipping rates on this product!
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
-
This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tape is 1,000 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .25 GPH per Emitter/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Previous SKU: 50-11703437 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Preset Pressure Regulator offers exceptional outlet pressure control to provide consistent performance from 1/2 to 12 gallons per minute. Both the inlet and the outlet are 3/4" FIPT (Female Iron Pipe Thread). It is made in the USA. Previous SKU: G-00174 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Preset Pressure Regulator connects drip tubing or distribution tubing to any ¾” garden hose thread water source. The pressure regulator has a maximum operating pressure of 15 PSI. Consists of commercial grade, UV resistant plastic. For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Regulator / Screen Assembly connects drip tubing or distribution tubing to any ¾” garden hose thread water source. The pressure regulator has a maximum operating pressure of 15 PSI. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Series 3000 Air Vent and Vacuum Relief Valves protect both pressure and gravity systems against pipeline damage by releasing or venting entrapped air during system filling and preventing vacuum locks while the pipeline empties. This 2" Air Vent is normally installed by threading onto NPT (National Pipe Thread) steel or plastic risers. Features:
- Large orifice engineered to provide maximum air flow.
- Cast aluminum body combines lightweight strength and corrosion resistance.
- Synthetic rubber seal assures positive seal even with low head applications.
- Simple design ensures economical trouble-free performance.
- Maximum working pressure = 150 psi.
- Orifice diameter = 1.75"
- Height = 6.00"
- Width = 3.72"
-
One of the key elements in a drip irrigation system is air relief. Clogged emitters can create substantial voids in coverage which can lead to dead plants and dry turf. Installing automatic air relief valves on the end of lateral lines and emitter line will prolong the efficiency of your system.
-
Backflow Preventer (3/4" FHT x 3/4" MHT) A backflow preventer is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices. It comes with a 3/4″ FHT inlet and a 3/4″ MHT outlet. No Teflon tape is required since both ends are hose thread. A standard hose washer is included to make a water tight seal. For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Hose Swivel (3/4" FHT x 3/4" FPT) 3/4″ Hose Swivel attaches to a hose bib, faucet, spigot, hydrant, garden hose or hose threaded parts (like filters and pressure regulators) and accepts fittings with 3/4″ male hose threads (MHT). Previous SKU: G-00172 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control. Brand Name: Jain For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Pressure Regulator - 12 PSI (2" FPT with 4 Regulating Units) @ 20-70 GPM Netafim Pressure Regulators are manufactured with non-corrosive, high quality plastic, that withstands all fertilizers and chemicals in common use providing years of trouble-free operation. The one-piece sealed regulating unit – different for each pressure option – is field replaceable and easy to maintain. Brand Name: Netafim
-
Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control. Brand Name: Jain For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Pressure Regulator - 20 PSI (3/4" FPT) Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control. Brand Name: Nelson For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tape is 1,000 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .5 GPM/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Previous SKU: G-00170 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Product Features
- 12" spacing
- Uses standard Power Loc 55 fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .5"
- Operating pressure range: 7 - 60 PSI
- Wall thickness: .040"
- Filtration requirements: 120 mesh
- Emitter flow rate: 1 GPH (nominal at 10 PSI)
- Coil length: 100'
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
Want to see more Drip irrigation ideas? Visit our Drip Irrigation FAQ (Frequently Asked Questions) page.