Insert Fittings & Micro-Tubing Fittings

>>Insert Fittings & Micro-Tubing Fittings

Insert Fittings & Micro-Tubing Fittings

The go-to fitting option for most contractors will always be the standard barbed insert fitting. Another low cost alternative to a locking fitting, the fittings offered by Jain are made with regrind tubing plastic. This helps keep the cost low while reducing our carbon footprint.  Our 100′ and 500′ rolls of Supply Tubing – White Stripe (.62″ OD x .52″ ID) use these insert fittings.

1/4″ Micro-Tubing Fittings can be used with drip irrigation to either connect 1/4″ Mini-Pepline or 1/4″ Distribution Tubing to branch off another line. These fittings can also be inserted in 1/2″ Supply Tubing. Use a 1/4″ Punch Tool to make the proper size hole in the supply tubing.

We also offer a different style of insert fittings for the larger poly tubing that we stock.  These fittings would require a clamp on each side if you have much pressure.

Search By Category

Search…

Irrigation Supplies

We Have 30 Years of Experience Providing Our Customers With the Highest Quality, Most Reliable, Energy Efficient Irrigation, Wastewater, Manure and Fertilizer Parts and Equipment.

We specialize in making irrigation more convenient by providing you with easy online ordering, fast shipping, simple account management, great customer service, expert product advice, help with product selection, ordering, and quick quotes. We carry the best brands with the latest technology for your system upgrades and carry the replacement parts you need to keep your systems operating at their peak. Contact us today info@irrigationsupplyparts.com

  • 5/8" 8mil .25 GPH @ 12" W/ FLAP 1000' , OR .42 GPM PER 100' OF DRIP TAPE

  • 1/2" Insert Coupler (.52" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to join two together pieces of 1/2" Supply Tubing.  Due to the style and size of the tubing as, a clamp is not typically required. Brand Name: Jain  
  • 1/2″ Insert Elbow (.52″ OD), which is a 1/2″ barb x 1/2″ barb poly fitting, allows you to make a 90 degree turn while joining together two pieces of 1/2″ Supply Tubing.  Due to the style and size of the tubing as, a clamp is not typically required. Brand Name: Jain  
  • 1/2" Insert Inline Valve (.52 ID), Insert Valve Inline Valve 1/2" Insert Inline Valve (.52 ID), Insert Valve Inline Valve
    1/2" Insert In-Line Valve (.52" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to control water flow of individual lines.  The valve connects sections of 1/2" Supply Tubing.  A valve can be easily installed directly into an individual row or into the mainline to control the water flow of more than one row.  Requires NO glue or tools for installation. Brand Name: AntelcoAntelco Logo  
  • 1/2" Insert Tee (.52" OD), which is a 1/2" barb x 1/2" barb x 1/2" barb poly fitting, allows you to branch off an additional 1/2″ line from the mainline or for an individual row.  Due to the style and size of the tubing as, a clamp is not typically required. Brand Name: Jain  
  • 1/2" Insert x 3/4" MPT (Male Pipe Thread) Adapter is used to couple a 1/2" hose to a 3/4" FPT (female pipe thread) fitting.  Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1/2" O.D. (outside diameter) opening to a 3/4" O.D. (outside diameter). Brand Name: AntelcoAntelco Logo  
  • 1/4″ Barb Connector to be used with drip irrigation to either connect 1/4″ dripper tubing or 1/4″ distribution tubing to 1/2″ supply tubing or to extend the length of 1/4″ tubing by acting as a coupling. Use a 1/4″ punch tool to make the proper size hole in the supply tubing.  This irrigation method works great in landscaping, hanging baskets, flower pots and garden boxes! Brand Name: Jain