Emitters & Sprinklers

  • Note: This tubing comes in a 100-foot roll, in a box measuring 31" by 31" by 15", so online you can order two at a time. If you are ordering three or more rolls, please call 517-458-9741 for other shipping options.

    Poly Tubing for Drip Irrigation Systems

    Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.

    Previous SKU: G-00171

    This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings

    For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
  • The Bowsmith NonStop emitter design, patented in 1974, is based on a simple unique principle found in no other emitter. This Pressure Cascade Principle permits the emitter to tolerate large amounts of suspended solids in irrigation water, without clogging and without the need for fine-mesh filter screens.

    For over 40 years, millions of Bowsmith NonStop emitters have demonstrated that the unique NonStop Continuous Flushing Action (Pressure Cascade Principle) really works, even under conditions that would quickly clog ordinary emitters. With only 30-mesh filtration, Bowsmith NonStop emitters have operated successfully with water containing heavy concentrations of sand, silt, iron bacteria "slime", calcium carbonates, even algae and moss.

    To the grower and contractor this means:

              • Reduction in plant loss and stress.

              • Lower capital investment in filtration equipment.

              • Lower labor costs for filter maintenance and overall system maintenance.

    The use of very fine mesh screen (140 - 200 mesh) filtration that is necessary for
    ordinary emitters is not recommended for Bowsmith NonStop emitters.
    Why? Because of the necessity for frequent cleaning of the filters.

  • Preset Pressure Regulator offers exceptional outlet pressure control to provide consistent performance from 1/2 to 12 gallons per minute.  Both the inlet and the outlet are 3/4" FIPT (Female Iron Pipe Thread).  It is made in the USA. Previous SKU: G-00174 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
  • Aqua Spray Sticks are engineered to provide an irrigation system that delivers both high performance and dependability. Ease-of-use, performance, and low-cost makes Aqua Spray Sticks an ideal product line for greenhouses, nurseries, and orchards. Simplicity in design and easy installation mean lower labor and material costs. Sold in packs of 100 each. We only stock black and green spray sticks at this time.  Please call us for additional options / special orders at (517)458-9741.
    • Stake designed in a "H" pattern and taller for better stability in most soil medias
    • Dual shut off capabilities: (A) Shut off tip on side instead of base of spray stick to eliminate contaminating tubing with soil  (B) Second shut off capability on stake as an oval with use of our anti-kink nursery tubing
    • Multiple flow rates and patterns - there's an Aqua Spray Stick that's right for your operation
    • Made with UV-resistant resins, designed to last and reduce the possibility of tip damage
    • Field friendly, may be assembled and disassembled in the field
    • Fits all Dan parts and accessories
    • Built-in shut-off tip
    • Compatible with Leak Prevention Device (LPD)
    • Designed to work effortlessly for years
    • Simple design allows you to unclog Aqua Spray Sticks by simply pulling off the Spray Stick, cleaning the channel, and reinserting the same emitter back on the tubing
    • Uses 187x125 polyethylene tubing
    • Down spray and horizontal spray patterns available
    Model #  Color Volume Pattern Size Flow (20 PSI) In Stock
    ASBLK-6 Black High Flow Down 160 6" 15.0 Yes
    ASGRN-6 Green Medium Flow Down 160 6" 11.4 Yes
    ASAVCDO-6 Avocado Low Flow Down 160 6" 6.6 Special Order
    ASTERCTA-6 Terra Cotta Mini Flow Down 160 6" 4.2 Special Order
    ASBRN-6 Brown Low Flow Flat 90 6" 6.6 Special Order
    ASGRY-6 Gray Mini  Flow Flat 90 6" 3.0 Special Order
    ASBLU-6 Blue Medium Flow Flat 360 6" 10.8 Special Order
    Aqua Spray Stakes, Aqua Spray Sticks, Spray Sticks, Jain Irrigation   Brand Name: Jain   
  • Color coded for easy flow identification, the Jain Ceta PC Emitter is a take-apart point source emitter with a separate barb for inlet and outlet installations. The Ceta PC Emitters self-flushing and insect baffle make it an ideal candidate for nursery and agricultural applications. PC stands for Pressure Compensating. The 0.5 GPH and 1.0 GPH Emitters (Pressure Compensating) deliver a consistent output of water, even with changes in pressure due to long runs of drip tubing or elevation changes. These emitters are self-flushing and less likely to clog than non-pressure compensating drippers. A removable top makes cleaning them simple. This emitter may be inserted in 1/2" supply tubing by using a 1/4" punch tool or installed at the end of 1/4" distribution tubing or 1/4" dripper line due to its 1/4" barb (also known as a 250 barb) on one end. An emitter like this allows you to get water to exact locations unlike drip tubing which has built-in emitters spaced evenly in the tubing.  For example, you could have a 1/2" distribution tubing running through your landscape bed.  If a planting is near this tubing, you can insert an emitter near the planting.  Another option is to install a 1/4" insert coupler in the 1/2" distribution tubing to connect a 1/4" dripper line to it.  This line can then be run in and around plantings.  At the end of the dripper line, install an emitter.  This will allow you to irrigate the area.  There are multiple options for installation using dripper line, distribution tubing and emitters.  This is a pack of 100 emitters.  Choose your flow rate (0.5 GPH or 1.0 GPH). Product Features
    • Color-coded for easy flow rate identification
    • 1/4" inlet and outlet barb
    • Self-flushing action with insect baffle to minimize blockage
    • Take-apart design for easy inspection and cleaning
    Specifications
    • Operating range: 15-50 PSI
    • Flow rates: 0.5 and 1.0 GPH
    • Minimum filtration: 150 mesh
    Sold in packs of 100 each. Brand: Jain   
  • Product Features • High-impact, heavy-duty plastic materials provide resistance to corrosion fertilizers and UV radiation. • Compact, sturdy, closed and protected ball engine. • Wide range of flow rates available in all three body angles (Low Angle-10 Degree, Low Angle-14 Degree or High Angle-25 Degree) • Three body angles allow for a wide range of wetted diameters. • Color-coded bayonet nozzle for easy operation and service. • Wetted diameters: 50 - 65 feet • Optional Flow Regulator. • Brown nozzle is used with Road Guard Only. Applications Orchards, Vineyards, Banana Plantations, Strawberries, Lettuce and Vegetables. Low-Angle for under-tree applications:  Irrigation and Frost Protection (Please call us to special order Low Angle) High-Angle for over-crop applications:  Irrigation, Cooling and Frost Protection Technical Data Flow rates 1.5 to 3.8 gpm Working pressure: 35 to 60 psi Wetted Diameters: 35 to 65 feet Click Jain's Rotating Sprinklers Brochure for more information. We stock two models at this time, but would be happy to special order any other models to meet your needs. Brand: Jain   
  • Signature 1973 Whiz Head Rotary Sprinkler is ideal for riser installations in planting areas.  It has a 1⁄2" (1,27 cm) female threaded inlet.  These sprinklers are made of high-impact corrosion resistant plastic.  Stainless steel bearing and large orifice nozzle.  Made in the USA. Brand Name: Signature Control Systems

  • Product Features
    • 12" spacing
    • Uses standard Power Loc 55 fittings
    • Black tubing
    • Patented Cascade Labyrinth Technology reduces chance of clogging
    • Root Barrier- prevents roots and debris from entering line
    • UV Resistant
    • Silicone diaphragm (molded - not cut)
    Specifications
    • Size: .5"
    • Operating pressure range: 7 - 60 PSI
    • Wall thickness: .040"
    • Filtration requirements: 120 mesh
    • Emitter flow rate: 1 GPH (nominal at 10 PSI)
    • Coil length: 100'

    This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings

    Want to see more Drip irrigation ideas? Visit our Drip Irrigation FAQ (Frequently Asked Questions) page.  
Go to Top