-
Aqua Spray Sticks are engineered to provide an irrigation system that delivers both high performance and dependability. Ease-of-use, performance, and low-cost makes Aqua Spray Sticks an ideal product line for greenhouses, nurseries, and orchards. Simplicity in design and easy installation mean lower labor and material costs. Sold in packs of 100 each. We only stock black and green spray sticks at this time. Please call us for additional options / special orders at (517)458-9741.
- Stake designed in a "H" pattern and taller for better stability in most soil medias
- Dual shut off capabilities: (A) Shut off tip on side instead of base of spray stick to eliminate contaminating tubing with soil (B) Second shut off capability on stake as an oval with use of our anti-kink nursery tubing
- Multiple flow rates and patterns - there's an Aqua Spray Stick that's right for your operation
- Made with UV-resistant resins, designed to last and reduce the possibility of tip damage
- Field friendly, may be assembled and disassembled in the field
- Fits all Dan parts and accessories
- Built-in shut-off tip
- Compatible with Leak Prevention Device (LPD)
- Designed to work effortlessly for years
- Simple design allows you to unclog Aqua Spray Sticks by simply pulling off the Spray Stick, cleaning the channel, and reinserting the same emitter back on the tubing
- Uses 187x125 polyethylene tubing
- Down spray and horizontal spray patterns available
Model # Color Volume Pattern Size Flow (20 PSI) In Stock ASBLK-6 Black High Flow Down 160 6" 15.0 Yes ASGRN-6 Green Medium Flow Down 160 6" 11.4 Yes ASAVCDO-6 Avocado Low Flow Down 160 6" 6.6 Special Order ASTERCTA-6 Terra Cotta Mini Flow Down 160 6" 4.2 Special Order ASBRN-6 Brown Low Flow Flat 90 6" 6.6 Special Order ASGRY-6 Gray Mini Flow Flat 90 6" 3.0 Special Order ASBLU-6 Blue Medium Flow Flat 360 6" 10.8 Special Order -
Color coded for easy flow identification, the Jain Ceta PC Emitter is a take-apart point source emitter with a separate barb for inlet and outlet installations. The Ceta PC Emitters self-flushing and insect baffle make it an ideal candidate for nursery and agricultural applications. PC stands for Pressure Compensating. The 0.5 GPH and 1.0 GPH Emitters (Pressure Compensating) deliver a consistent output of water, even with changes in pressure due to long runs of drip tubing or elevation changes. These emitters are self-flushing and less likely to clog than non-pressure compensating drippers. A removable top makes cleaning them simple. This emitter may be inserted in 1/2" supply tubing by using a 1/4" punch tool or installed at the end of 1/4" distribution tubing or 1/4" dripper line due to its 1/4" barb (also known as a 250 barb) on one end. An emitter like this allows you to get water to exact locations unlike drip tubing which has built-in emitters spaced evenly in the tubing. For example, you could have a 1/2" distribution tubing running through your landscape bed. If a planting is near this tubing, you can insert an emitter near the planting. Another option is to install a 1/4" insert coupler in the 1/2" distribution tubing to connect a 1/4" dripper line to it. This line can then be run in and around plantings. At the end of the dripper line, install an emitter. This will allow you to irrigate the area. There are multiple options for installation using dripper line, distribution tubing and emitters. This is a pack of 100 emitters. Choose your flow rate (0.5 GPH or 1.0 GPH). Product Features
- Color-coded for easy flow rate identification
- 1/4" inlet and outlet barb
- Self-flushing action with insect baffle to minimize blockage
- Take-apart design for easy inspection and cleaning
- Operating range: 15-50 PSI
- Flow rates: 0.5 and 1.0 GPH
- Minimum filtration: 150 mesh
-
Hole Punch used for “punching” a hole in tubing to insert 400 Series Barb Fittings. This punch is constructed of heavy duty plastic. It creates clean, precise holes for the barb fittings. Brand Name: Jain
-
Punch Tool For Layflat Tubing (Model # LFP-1) Hole Punch used for “punching” a hole in layflat tubing to insert 400 Series Barb Fittings. This punch is constructed of heavy duty plastic. It creates clean, precise holes for the layflat connectors. Brand Name: Jain
-
Product Features • High-impact, heavy-duty plastic materials provide resistance to corrosion fertilizers and UV radiation. • Compact, sturdy, closed and protected ball engine. • Wide range of flow rates available in all three body angles (Low Angle-10 Degree, Low Angle-14 Degree or High Angle-25 Degree) • Three body angles allow for a wide range of wetted diameters. • Color-coded bayonet nozzle for easy operation and service. • Wetted diameters: 50 - 65 feet • Optional Flow Regulator. • Brown nozzle is used with Road Guard Only. Applications Orchards, Vineyards, Banana Plantations, Strawberries, Lettuce and Vegetables. Low-Angle for under-tree applications: Irrigation and Frost Protection (Please call us to special order Low Angle) High-Angle for over-crop applications: Irrigation, Cooling and Frost Protection Technical Data Flow rates 1.5 to 3.8 gpm Working pressure: 35 to 60 psi Wetted Diameters: 35 to 65 feet Click Jain's Rotating Sprinklers Brochure for more information. We stock two models at this time, but would be happy to special order any other models to meet your needs. Brand: Jain
-
One of the key elements in a drip irrigation system is air relief. Clogged emitters can create substantial voids in coverage which can lead to dead plants and dry turf. Installing automatic air relief valves on the end of lateral lines and emitter line will prolong the efficiency of your system.
-
1/4″ Vinyl Distribution Tubing allows you to get water to the desired locations in a conservative manner. You may use fittings to extend the length of tubing, make a 90 degree angle or add a row to your system. You can also insert an emitter at the end of the line to reach the exact location of a planting. A 250 barb goof plug may be used at the end of the line to close it off.
- All Jain polyethylene tubing is manufactured using Union Carbide materials that offer the exclusive Fingerprint® identification feature and contain a minimum of 2% carbon black for UV protection
- Strict quality control procedures ensure highest uniformity and product quality
- Polyethylene and vinyl tubing are available in black (standard) and special colors (upon request)
- Complete information printed on the tubing indicates manufacturer, model number, dimensions, resin, and date of manufacture. As applicable, the coil length is also included.
- Convenient coil sizes and packaging to ease handling and installation
-
- 1.5" Oval Hose with 21 PSI 300' roll
- Manufactured from virgin LLDPE using advanced extrusion technology.
- Excellent characteristics of LLDPE provide durable tubing with close dimensional tolerances.
- Jain Oval Hose once pressurized becomes 98% round.
- Suitable for surface as well as subsurface installation.
- UV stabilized. No environmental effects.
- Each batch passes through following stringent quality tests to ensure efficient and trouble free performance. - Dimensional tolerances. - Short term & long term hydraulic pressure. - Heat reversion. - Carbon black content. - Environmental stress crack resistance (ESCR). - Tensile Strength and Elongation.
- Best environmental stress crack resistance.
- Oval shape reduces freight and storage cost.
- Tested as per ASAE standard.
-
Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control. Brand Name: Jain For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Pressure Regulator - 12 PSI (2" FPT with 4 Regulating Units) @ 20-70 GPM Netafim Pressure Regulators are manufactured with non-corrosive, high quality plastic, that withstands all fertilizers and chemicals in common use providing years of trouble-free operation. The one-piece sealed regulating unit – different for each pressure option – is field replaceable and easy to maintain. Brand Name: Netafim
-
Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control. Brand Name: Jain For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Pressure Regulator - 20 PSI (3/4" FPT) Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control. Brand Name: Nelson For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Figure Eight End Closure for tubing. This fitting is the most common way to end a supply line. As you can see by the diagram below, it is very simple to end a hose with this Figure Eight End Closure. Just slip the figure eight end closure over the end of the line. While bending the tubing over, slide the figure eight back over the remaining hose for a leak proof fit. Installation Instructions: Brand Name: Jain