Power-Loc x 3/4″ FH Swivel Tee with Washer

Home>Drip Irrigation>Power-Loc Fittings>Power-Loc x 3/4″ FH Swivel Tee with Washer

Power-Loc x 3/4″ FH Swivel Tee with Washer

$4.41

Power-Loc x 3/4″ FH Swivel Tee with Washer (PL-80-PST-WW)

  • Fits a wide range of tubing ID and wall thicknesses (see chart below)
  • Positive stop to assure tubing is fully installed
  • Low effort, square thread drive ring quickly locks in place, no tools needed
  • Barb design ensures tubing will not slip out or blow off at high pressure and temperature
  • To connect Total CV and polyethylene supply tubing

Brand Name: JainJainLogo

Description

Product Features:

• Very easy to install tubing over single barb

• Positive stop to assure tubing is fully installed

• Low effort, square thread drive ring quickly locks tubing in place — no tools needed

• Barb design ensures tubing will not slip out or blow off at high pressure and temperature

• Each fitting will accommodate a wide range of hose diameter and wall thickness

• Working pressure: 60 psi

Fitting Series #Acceptable I.D. (Inches)Acceptable I.D.(Millimeters)Acceptable Wall Thickness (Inches)Acceptable Wall Thickness (Millimeters)
550.520 to 0.62013.2 to 15.70.045 to 0.0551.14 to 1.40
600.580 to 0.67514.7 to 17.10.025 to 0.0550.64 to 1.40
700.665 to 0.76516.9 to 19.40.035 to 0.0550.89 to 1.40
800.790 to 0.84520.1 to 21.50.045 to 0.0651.14 to 1.65